Micro-Abrasive Wear Behavior Study of an Intermetallic Material—Fe–30Al–6Cr (at.%) Under Conditions of Room and Moderate Temperatures: A Comparison

Simple item page
AudienciaPúblico en generales_ES
CoberturaMéxico[ 143]es_ES
Fecha de ingreso2026-10-05T16:35:01Z
Fecha de publicación2021-01-01
ResumenPresent work focus on research of tribological resistance of an intermetallic material (Fe–30Al–6Cr—at.%), seeking correlations between wear volume, friction coefficient and temperature. Abrasive experiments were performed with specimens of an iron aluminide alloy against AISI 52100 steel ball and abrasive particles of silicon carbide in glycerin. An individual study was done with respect to their characteristics in terms of SEM-EDS analysis. Different test conditions were defined and the abrasive slurry was, continuously, supplied between the specimen and the ball. Values of tangential force and normal force were acquired simultaneously, for “ball – abrasive particles – specimen” tribological system. Systematic studies of the occurrences of the micro-abrasive wear modes, friction and wear generated during tests were done. Moderate temperature favored a larger degree of plastic deformation than removal of material, reducing the wear rate and decreasing glycerin viscosity, which facilitated the movement of the abrasive particles and, consequently, reduced the friction coefficient. Wear volume presented a rising behavior with increase in sliding distance at room and moderate temperatures. Present research explored the potential of an intermetallic material as structural material subjected to moderate temperatures.es_ES
Doihttps://doi.org/10.1007/978-981-15-9893-7_51es_ES
ISBN978-981159892-0es_ES
URIhttps://riuat.uat.edu.mx/handle/123456789/6486
IdiomaInglés[20]es_ES
EditorialSpringer Science and Business Media Deutschland GmbHes_ES
RelaciónLecture Notes in Mechanical Engineeringes_ES
URL relacionadohttps://doi.org/10.1007/978-981-15-9893-7_51es_ES
DerechosAcceso restringido / Suscripción (Metadatos de producción científica)es_ES
Licenciahttp://purl.org/coar/access_right/c_16eces_ES
FuenteLecture Notes in Mechanical Engineering
Palabra claveBall-cratering wear testinges_ES
Palabra claveIron aluminide alloyes_ES
Palabra claveRolling abrasiones_ES
TítuloMicro-Abrasive Wear Behavior Study of an Intermetallic Material—Fe–30Al–6Cr (at.%) Under Conditions of Room and Moderate Temperatures: A Comparisones_ES
TipoPonenciaes_ES
ArbitradoHa sido Arbitradoes_ES
AutorSilva, Eduardo K. T. M.
AutorLuna-Domínguez, Jorge H.
AutorVerma, Vikas
AutorCozza, Ronaldo Câmara
AutorSilva, Eduardo K. T. M.es_ES
AutorLuna-Domínguez, Jorge H.es_ES
AutorVerma, Vikases_ES
AutorCozza, Ronaldo Câmaraes_ES
InstituciónUniversidad Autónoma de Tamaulipas
InstituciónUniversidad Autónoma de Tamaulipases_ES
Rango de páginas693-706es_ES
URL relacionadahttps://doi.org/10.1007/978-981-15-9893-7_51
Tipo de artículoIndexado
Tipo de artículoIndexadoes_ES

Files

Collections

Documentación Cientifica