High temperature oxidation-sulfidation behavior of Cr-Al2O3 and Nb-Al2O3 composites densified by spark plasma sintering
| Audiencia | Público en general | es_ES |
| Cobertura | México | es_ES |
| Fecha de ingreso | 2026-10-05T16:33:07Z | |
| Fecha de publicación | 2007-01-01 | |
| Resumen | The high temperature oxidation-sulfidation behavior of Cr-Al2O3 and Nb-Al2O3 composites prepared by mechanical alloying (MA) and spark plasma sintering (SPS) has been studied. These composite powders have a particular metal-ceramic interpenetrating network and excellent mechanical properties. Oxidation-sulfidation tests were carried out at 900 degrees C, in a 2.5\%SO2 + 3.6\%O-2 + N-2(balance) atmosphere for 48 h. The results revealed the influence of the sintering conditions on the specimens corrosion resistance, i.e. the Cr-Al2O3 and Nb-Al2O3 composite sintered at 1310 degrees C/4 min showed better corrosion resistance (lower weight gains) compared with those found for the 1440 degrees C/5 min conditions. For the former composite, a protective Cr2O3 layer immediately forms upon heating, whereas for the later pest disintegration was noted. Thus, under the same sintering conditions the Nb-Al2O3 composites showed the highest weight gains. The oxidation products were investigated by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. (C) 2007 Elsevier B.V. All rights reserved. | es_ES |
| Doi | https://doi.org/10.1016/j.msea.2007.02.115 | es_ES |
| URI | https://riuat.uat.edu.mx/handle/123456789/4963 | |
| Idioma | en | es_ES |
| Editorial | ELSEVIER SCIENCE SA | es_ES |
| Relación | Materials Science and Engineering: A | es_ES |
| URL relacionado | https://doi.org/10.1016/j.msea.2007.02.115 | es_ES |
| Derechos | Acceso restringido / Suscripción (Metadatos de producción científica) | es_ES |
| Licencia | http://purl.org/coar/access_right/c_16ec | es_ES |
| Fuente | Materials Science and Engineering: A | |
| Palabra clave | oxidation-sulfidation | es_ES |
| Palabra clave | composites | es_ES |
| Palabra clave | mechanical alloying | es_ES |
| Palabra clave | spark plasma sintering | es_ES |
| Palabra clave | SEM | es_ES |
| Palabra clave | TEM | es_ES |
| Título | High temperature oxidation-sulfidation behavior of Cr-Al2O3 and Nb-Al2O3 composites densified by spark plasma sintering | es_ES |
| Tipo | Artículo | es_ES |
| Arbitrado | Ha sido Arbitrado | es_ES |
| Autor | Saucedo-Acuna, R. A. | |
| Autor | Monreal-Romero, H. | |
| Autor | Martinez-Villafane, A. | |
| Autor | Chacon-Nava, J. G. | |
| Autor | Arce-Colunga, U. | |
| Autor | Gaona-Tiburcio, C. | |
| Autor | De la Torre, S. D. | |
| Autor | Saucedo-Acuna, R. A. | es_ES |
| Autor | Monreal-Romero, H. | es_ES |
| Autor | Martinez-Villafane, A. | es_ES |
| Autor | Chacon-Nava, J. G. | es_ES |
| Autor | Arce-Colunga, U. | es_ES |
| Autor | Gaona-Tiburcio, C. | es_ES |
| Autor | De la Torre, S. D. | es_ES |
| Institución | Universidad Autónoma de Tamaulipas | |
| Institución | Universidad Autónoma de Tamaulipas | es_ES |
| Número | 1-2 | es_ES |
| Rango de páginas | 69-74 | es_ES |
| URL relacionada | https://doi.org/10.1016/j.msea.2007.02.115 | |
| Tipo de artículo | Indexado | |
| Tipo de artículo | Indexado | es_ES |
| Volumen | 471 | es_ES |
